R&S FSV3000 Series - Page 232

Measurements and Results
R&S
®
FSVA3000/ R&S
®
FSV3000
232User Manual 1178.8520.02 ─ 01
Band Category ........................................................................................................... 232
Base Station Class .....................................................................................................232
Base Station Maximum Output Power ....................................................................... 233
Bands .........................................................................................................................233
Base Station RF Bandwidth ....................................................................................... 233
Carrier Adjacent to RF Bandwidth Edge .................................................................... 233
Power Gsm Carrier .................................................................................................... 233
Apply to SEM ............................................................................................................. 234
Band Category
Defines the band category for MSR measurements, i.e. the combination of available
carriers to measure.
"BC1"
LTE FDD and W-CDMA
"BC2"
LTE FDD, W-CDMA and GSM/EDGE
"BC3"
LTE TDD and TD-SCDMA
Remote command:
[SENSe:]ESPectrum<sb>:MSR:BCATegory on page 816
Base Station Class
Defines the class of the base station according to its sending range.
This setting is required to calculate the SEM limits according to standard 3GPP 37.141
V12.2.0.
Spectrum Emission Mask (SEM) Measurement