R&S FSV3000 Series - Page 449

Common Analysis and Display Functions
R&S
®
FSVA3000/ R&S
®
FSV3000
449User Manual 1178.8520.02 ─ 01
Remote commands:
CALCulate<n>:MARKer<m>:FUNCtion:PNOise[:STATe] on page 1019
CALCulate<n>:MARKer<m>:FUNCtion:PNOise:RESult? on page 1019
Phase Noise Measurement State .............................................................................. 449
Defining Reference Point ........................................................................................... 450
Switching All Phase Noise Measurements Off ...........................................................450
Phase Noise Measurement State
Activates or deactivates phase noise measurement for the reference point in the dia-
gram.
This function is only available for delta markers.
Marker Usage