R&S FSV3000 Series - Page 698

Network and Remote Operation
R&S
®
FSVA3000/ R&S
®
FSV3000
698User Manual 1178.8520.02 ─ 01
Computer Name..........................................................................................................698
IP Address...................................................................................................................699
Subnet Mask............................................................................................................... 699
DHCP..........................................................................................................................699
Network Configuration.................................................................................................699
Computer Name
Each instrument is delivered with an assigned computer name, but this name can be
changed. The naming conventions of Windows apply. If too many characters and/or
numbers are entered, an error message is displayed in the status line.
The default instrument name is a non-case-sensitive string with the following syntax:
<Type><variant>-<serial_number>
The serial number can be found on the rear panel of the instrument. It is the third part
of the device ID printed on the bar code sticker:
Network and Remote Control Settings