To Next Page

To Previous Page

Instrument Function

R&S

SMB100A

234Operating Manual 1407.0806.32 ─ 21

Decimal Point - ASCII File Settings

Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','

(comma) with floating-point numerals.

Remote command:

[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:DECimal

on page 402

Column Separator- ASCII File Settings

Selects the separator between the frequency and level column of the ASCII table.

Remote command:

[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:COLumn

on page 402

Select ASCII Source / Destination - Import/Export Pulse Train Files

Opens the "File Manager" for selecting the ASCII file to be imported into a pulse train

list (source) or the ASCII file the pulse train list is exported (destination) in.

Remote command:

[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:CATalog? on page 400

[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SELect on page 401

Select Destination / Source - Import/Export Pulse Train Files

Opens the "File Manager" for selecting the pulse train list to be exported (source) into

an ASCII file, or the destination for the ASCII file to be imported (destination) in.

Remote command:

[:SOURce<hw>]:PULM:TRAin:DEXChange:SELect on page 404

Import / Export - Import/Export Pulse Train Files

Starts the export or import of the selected file.

If import is selected, the ASCII file is imported as pulse train list.

If export is selected, the pulse train list is exported into the selected ASCII file.

Remote command:

[:SOURce<hw>]:PULM:TRAin:DEXChange:EXECute on page 403

Modulation Generator and LF Output

R&S SMB100A User Manual

Other manuals for R&S SMB100A