Finishers SR4060/SR4070 (D611/D612)
D131/D132/D133 2-58 SM
5. Pull out the jogger unit [A].
6. Remove the tapes and retainers.
Docking the Finisher
If you are not installing the Cover Interposer (D614):
Peel the strip from the sponge cushion [A] and attach it to the finisher then go to the next step.
If you are installing the Cover Interposer (D614):
Do not attach the sponge cushion to the finisher. It must be attached to the cover interposer.
Do not attach the grounding plate [B] to the finisher. It must be attached to the cover
interposer.
To Next Page
Loading...
