Peripheral Specifications
D131/D132/D133 1-14 SM Appendix
DIP SW Settings
The correct DIP SW settings of the Punch Unit A812 are provided in the table below for your
reference only. The DIP switches of these punch units do not need to be changed at installation,
or adjusted for operation.
Punch Unit Unit No.
DIP SW Settings
1 2 3 4
2-Hole (EUR/A) A812-40/A812-67 0 0 0 0
3-Hole (NA) A812-57 1 0 0 0
4-Hole EUR/A) A812-30 0 1 0 0
4-Hole (North Europe) A812-31 0 0 1 0
2-Hole (NA) A812-32 0 0 0 1
0: OFF, 1: ON
1.2.6 OUTPUT JOGGER UNIT TYPE 9002B (B513)
This jogger unit is installed above the shift tray of the Finisher SR4080.
Paper Size
A3 SEF, B4 SEF, 11" x 17" SEF
A4 LEF, B5 LEF, 8.5" x 11" LEF
Paper Weight 52 g/m
(14 to 58 lb)
Weight Less than 1.7 kg (3.7 lb.)
Dimensions (W x D x H) 125 mm x 450 mm x 100 mm (5" x 17.7" x 4")
Power Supply DC 24 V, DC 5V (From Finisher)
Power Consumption 24 W
To Next Page
Loading...
