14. Open the tandem tray (top paper tray) and remove the metal retainer bracket [A] (
x 1) and
wire, then the red tags (x2) and all tape.
Removing and Filling the Development Unit
Before you begin, remove the toner bottle if it is installed.
The toner bottle holder can be damaged if it is in the machine when you do the procedure
below.
1. Open the front door.
2. Remove the shutter cover [A] (
x 1).
3. Remove the lock screw [B].
4. Remove any remaining shipping tape [C].
5. Swing the bottle holder [D] to the left.
To Next Page
Loading...
