PCBs and HDD
D131/D132/D133 4-126 SM
13. Specify the SP and UP mode settings.
14. Do the process control self-check.
NVRAM on the Controller
1. Make sure that you have the SMC report (factory settings). This report comes with the
machine.
2. Output the SMC data (SP5-990-001) if possible.
3. Turn the main switch off. Then unplug the power cord.
4. Install a New NVRAM on the controller. Then reassemble the machine.
5. Turn the main switch on.
6. SC995-02 occurs and the machine rewrites SP5-811-005 automatically.
7. When the operation panel displays Copy Screen, turn the machine off and on.
8. Do the process control self-check.
To Next Page
Loading...
