shooting
Clean the gear shaft and inside the gear.
Attach the gear.
Install the paper feed unit.
6.3.3 JAM CODES
Here are lists of SC codes that are printed in the SMC report; they do not appear on the operation
panel display.
ADF: Paper Jam Errors
No. Location Position Code
003 Separation Sensor: On P1
004 Skew Correction Sensor: On P1
005 Interval Sensor: On P2
006 Registration Sensor: On P2
007 Exit Sensor: On P2
053 Separation Sensor: Off P1
054 Skew Correction Sensor: Off P1
055 Interval Sensor: Off P2
056 Registration Sensor: Off P2
057 Exit Sensor: Off P2
To Next Page
Loading...
