Ricoh D131 - By-Pass Separation Roller Pressure Adjustment

Paper Feed
D131/D132/D133 4-118 SM
4.11.15 BY-PASS SEPARATION ROLLER PRESSURE ADJUSTMENT
1. Loosen the separation roller gear [A].
The position of the drive gear for the separation roller can be changed in order to change the
amount of pressure exerted by the separation roller. This adjustment can be done:
 When feeding special paper, especially thick paper
 When the customer experiences feed problems
 The separation roller gear is positioned at the groove before shipping.
2. Move the separation roller gear right to increase the pressure to correct misfeeds.