PCBs and HDD
D131/D132/D133 4-128 SM
4.12.4 HDD
1. Controller box cover p.4-122
2. Disconnect the HDD bracket from the machine frame ( x3).
The screws are held in place by rubber grommets.
The screws will not come out; just keeping turning them counter-clockwise until you feel
them come off.
3. Free the harnesses at [A] (
x2).
4. Disconnect the HDD [B] (
x2).
5. Lay the HDD bracket [A] on a flat surface.
6. Turn the bracket over [B], and then remove the screws (
X4).
To Next Page
Loading...
