Service Program Mode
D131/D132/D133 5-8 SM
5.2.5 SP MODE PRINT (SMC PRINT)
You can print an SMC Report to check the machine's condition. The SMC Report gives a list of the
SP commands and their settings.
5990
SP Print Mode (SMC Print)
In the SP mode, push "Copy Window" to move to the copy screen, select the
paper size, then push Start. Select A4/LT (Sideways) or larger to make sure
that all the information is printed. Push "SP Window" to go back to the SP
mode, select the necessary SP Print Mode, and push Execute.
001 All (Data List)
002 SP (Mode Data List)
003 User Program Data
004 Logging Data
005 Self-Diagnostic Report
006 Non-Default (Prints only SPs that are set to values other than defaults.)
007 NIB Summary (Configuration, Systemlog, Nvramlog)
008 Capture Log
021 Copier User Program (Copy Management Report)
022 Scanner SP
023 Scanner User Program (Scanner Management Report)
To Next Page
Loading...
