Main Machine
D131/D132/D133 2-20 SM
Installing the Scanner Heater
1. Rear upper cover Rear Covers
2. Exposure glass
Exposure Glass
3. Operation panel
Operation Panel
4. Left stay
Scanner Wire Replacement
5. Install the scanner heater [A] (
x 2)
6. Fasten the cable with the harness clamps (
x 3).
7. Fasten the connector [B] on the rear side of the machine (
x 1).
8. Connect the harness [C] to the connector [B] on the rear side of the machine.
To Next Page
Loading...
