Ricoh D131 - Attaching the Extensions for the D610

Cover Interposer Tray CI4000 (D614)
D131/D132/D133 2-76 SM
Attaching the Extensions for the D610
 The procedures in this section are for installation of the cover interposer with the D610
only.
 If you are installing the cover interposer with the D611/D612, go to the next section.
Modify the Attachments for the D610
Front Door Extension:
1. Attach spacer [A] to the front door extension (top) (
x 2).
2. Remove the lower hinge [B] and replace it with [C] (
x 2).
Rear Cover Extension (Bottom):
1. Remove [D] and replace it with [E] (
x 1).
2. Remove [F] and replace it with [G] (
x 1).
Plate Extension (Bottom):
1. Remove bracket [H] from
and attach it to at the end of the bottom plate extension (
x 2).