2.9 OUTPUT JOGGER UNIT TYPE 9002B (B513)
2.9.1 ACCESSORY CHECK
Check the accessories and their quantities against this list:
No. Description Q’ty
1. Jogger Unit B513 1
2. Tapping Screws - M3 x 6 2
3. Installation Procedure 1
2.9.2 INSTALLATION PROCEDURE
This jogger unit can be installed and used with the Finisher SR4080 only.
1. Turn the main machine switch off and disconnect the finisher from the main frame.
2. Use the flat head of a screwdriver to remove the left upper cover [A] from the finisher and
discard it.
To Next Page
Loading...
