Ricoh D131 - Toner End Sensor

Development Unit
SM 4-61 D131/D132/D133
Replacement
and
Adjustment
4.7.5 TONER END SENSOR
1. Development unit p.4-34
2. Toner end sensor cover [A] (
x1)
3. Toner hopper [A] (
x 2)
4. Toner end sensor [B] (
x 2)
 Remove the screws carefully to avoid stripping the holes.
 Before installing a new toner end sensor, clean the toner end sensor port [C].
Reinstallation
1. When you re-attach the toner end sensor cover, make sure that the toner end sensor harness
is not pinched between the cover and the unit.