Ricoh D131 - Leveling the Finisher; Selecting the Staple Supply Name

Finishers SR4060/SR4070 (D611/D612)
D131/D132/D133 2-62 SM
Leveling the Finisher
1. Set the leveling shoes [A] (x 3) under the feet [B].
2. Use a wrench to adjust the height of the screws [C] to level the machine.
Selecting the Staple Supply Name
Enter the SP mode and execute the following information.
5841 Supply Name Setting
These names appear when the user prints the
Inquiry List.
Press the Counter key, then press ‘Print Inquiry
List’.
Press the Inquiry button on the initial User Tools
screen.
013
Staple Std
Enter the name of the staples in use for normal
stapling (not booklet stapling). This setting should
be done for both the D611 and D612.
022
Staple Bind
Enter the name of the staples in use for booklet
stapling (saddle-stitching). This setting is required
only for the D612.