Ricoh D131 - Sc800: Overall System; Sc800

SC800: Overall System
D131/D132/D133 2-70 SM Appendix
2.9 SC800: OVERALL SYSTEM
2.9.1 SC800:
SC816 D
Energy save I/O subsystem error
The energy save I/O subsystem is defective or this system
detected a controller board error.
 Reboot the machine.
 Replace the controller board.
SC817 D
Monitor error GW
This is a file detection and electronic file signature check error
when the boot loader attempts to read the self-diagnostic module,
system kernel, or root system files from the OS Flash ROM, or the
items on the SD card in the controller slot are false or corrupted.
 OS Flash ROM data defective
 SD card data defective
1. Change the controller firmware.
2. Use another SD card.
Error Codes
Code Meaning
0x0000 0000 BIOS boot error
0x0000 0001 Primary boot start load error
0x0000 0002 Secondary boot load error (Boot3.Elf)
0x0000 0003 Self-diagnostic module error (Diag.Elf)
0x0000 0004 Kernel start error (Netbsd)
0x0000 0005 Root file system file read error (Rootfs)