SM 33 D619
10. Re-attach the SD card slot cover, and then switch the machine on.
11. At the Ready screen, press [User Tools/Counter] on the operation panel.
12. Touch the Administrator Tools tab.
13. Make sure the two items shown above are Off.
Slave Procedure 2
1. Under the System Administrator tab, touch [Program/Change/Delete Remote Machine].
2. Enter the IP address (or host name) of the Master machine.
Only one Master machine can be registered on the Slave machine.
Do not try to do more than one setting.
3. Touch [Exit] to close the screen.
To Next Page
Loading...
