Main Machine
D131/D132/D133 2-16 SM
Tandem Tray
Before shipping the machine, the tandem tray is set for A4 or LT LEF and must be adjusted if the
customer wants to use the tandem tray for another paper size.
Feed Station Allowed Size
Tandem Tray (Tray 1) A4 LEF, LT LEF
1. Open the front cover.
2. Completely pull out the tandem feed tray [A] so that the right tandem tray [B] separates from
the left tandem tray.
3. Remove the right tandem inner cover [A].
4. Re-position the side fences [B] (
x 2). The outer slot position is used when loading A4 size
paper.
5. Re-install the right tandem inner cover [A].
To Next Page
Loading...
