SP5000 Mode: SP5024 to SP5816
D131/D132/D133 3-88 SM Appendix
3.6 SP5000 MODE: SP5024 TO SP5816
5024
mm/inch Display Selection
Selects whether mm or inches are used in the display.
Note: After selecting the number, you must turn the main power switch off and
on.
Europe/Asia model: [0 = mm / 1 = inch]
American model: [0 = mm / 1 = inch]
5037 Status Lamp Mode Not Used
0: OFF / 1: ON
5045
Accounting Counter
Selects the counting method if the meter charge mode is enabled with
SP5-930-1.
Note: You can change the setting only one time.
[0 to 1/ 1]
0: Development counter. Shows the total counts for color (Y, M, C) and black
(K).
1: Paper counter. Shows the total page counts for: Black Total, Black Copies,
Black Prints.
5055
Display IP Address
Switches the banner display of MFP device display on and off.
[0 to 1 / 0 / 1]
[OFF] ON
To Next Page
Loading...
