Ricoh D131 - Energy Saver Modes

Energy Save
SM 7-1 D131/D132/D133
Energy Save
7. ENERGY SAVE
7.1 ENERGY SAVE
7.1.1 ENERGY SAVER MODES
Customers should use energy saver modes properly, to save energy and protect the environment.
The area shaded grey in this diagram represents the amount of energy that is saved when the
timers are at the default settings. If the timers are changed, then the energy saved will be different.
For example, if the timers are all set to 240 min., the grey area will disappear, and no energy is
saved before 240 min. expires.
Timer Settings
The user can set these timers with User Tools (System settings > Timer setting)
 Energy saver timer (1 – 240 min): Low Power Mode. Default setting: 1 to 240 minute
 Sleep Mode (1 to 240 min.): Default setting 1 min.
 Auto off timer (1 – 240 min): Off/Sleep Mode Default settings:
D131 1 min.
D132 1 min.
D133 15 min.