Ricoh D131 - Sc900: Miscellaneous; Sc900

SC900: Miscellaneous
D131/D132/D133 2-88 SM Appendix
2.10 SC900: MISCELLANEOUS
2.10.1 SC900
SC900 D
Electric counter error GW
The total count contains something that is not a number.
 NVRAM incorrect type
 NVRAM defective
 NVRAM data scrambled
 Unexpected error from external source
 Check the connection between the NVRAM and controller.
 Replace the NVRAM.
 Replace the controller board.
SC901 D
Mechanical total counter error
The mechanical counter is not connected.
 Mechanical total counter defective
 Mechanical total counter connector not connected
HDD Status Codes Displayed on Debug Console
Display Meaning
(-1) HDD not connected
(-2) HDD not ready
(-3) No level
(-4) Partition type incorrect
(-5) Error returned during level read or check
(-6) Error returned during level read or check
(-7) "filesystem" repair failed