Ricoh D131 - Download Error Codes

Program Download
D131/D132/D133 6-16 SM
6.4.2 DOWNLOAD ERROR CODES
Display Details Recovery
01
Reboot after card
insert E01
Module ID Card No.
xx/xx
Controller ROM update error 1
 Use the correct
card
When the update break data is
stored in NVRAM, the break module
information and the decompression
module capable of writing do not
match.
02
Download Error
E02 Power off/on
Controller ROM update error 2.
 Turn the machine
off/on to rewrite
Error occurs during ROM update
program initialization.
03
Download Error
E03 Power off/on
Controller ROM update error 3  Turn the machine
off/on
 Install the missing
ROM DIMM
The ROM for the write operation
does not exist.
04
Download Error
E04 Power off/on
Controller ROM update error 4  Turn the machine
off/on
 Set DIP SW 1 to
ON and retry
 Replace RAM
DIMM
 Replace controller
board
GZIP data confirmation fails. (CRC
value check)
05
Download Error
E05 Power off/on
Controller ROM update error 5  Turn the machine
off/on
 Set DIP SW 1 to
ON and retry
 Replace RAM
DIMM
 Replace controller
board
Error occurs when writing to the
device.