Ricoh D131 - General Notes; Important Notes

SM 49 D619
3. Touch [Restore Defaults] restore the default settings.
1.4.6 IMPORTANT NOTES
General Notes
Here are some important points to keep in mind:
 The recognition user code cannot be used for fax connection from either the Master or the
Slave machine.
 Mail sending with the fax connection (send result mail, scan-to-email same information
sending) is not compatible with S/MIME.
 The Slave machine may receive faxes from the Master machine line for dial-in and special
target transmissions.
 A Slave machine cannot be used in a fax connection with an externally installed counter
device.
 When a fax is sent using an address from the Slave machine address book, the transmission
destination is entered directly into the job log of the Master machine so it can manage the
transmission.
 Fax connection transmissions are not compatible with sending to a destination folder.
 The address book of a Master machine cannot be accessed from a Slave machine.
 Settings for dialing "0" and area codes are stores in the settings on the Master machine.
 An Activity Report records only the destinations of the senders. The main text of the
transmission is not shown.
 Only two Fax Headers (TTI) can be registered for the Slave machine.
 The counter on the Slave machine tallies fax TX/RX transactions
 In regard to TX/RX fax image capture, the Slave machine conducts TX transactions and the
Master machine conducts RX transactions.
 The quality of received messages printed on a Master and Slave machine may differ slightly.