Ricoh D131 - Original Width Sensors; Scanner Original Size Sensors

Scanner
D131/D132/D133 4-14 SM
When re-installing the exposure glass:
 Set the exposure glass first with the arrow mark in the upper left corner.
 When re-installing the right cover, make sure it is seated correctly at the right upper corner of
the exposure glass.
4.4.3 SCANNER ORIGINAL SIZE SENSORS
Original Width Sensors
1. Exposure glass Exposure Glass
2. Original width sensor (one-beam) (
x1, x1)
3. Original width sensor (two-beam) (
x1, x1)