Ricoh D131 - Front Door; Right Covers

Operation Panel and External Covers
SM 4-9 D131/D132/D133
Replacement
and
Adjustment
4.3.2 FRONT DOOR
1. While supporting the front door [A] with one hand.
2. Press down on the hinge bracket [B], and then raise the door slightly to remove it.
4.3.3 RIGHT COVERS
1. LCT entrance guide cover [A] (
x 2)
2. Right upper cover [B] (
x 2)
 To remove the right cover, remove the LCT entrance guide plate, open the by-pass tray,
then slide the right upper cover down to remove it.
 Before tightening the screws when re-attaching, make sure that 1) the tabs [C] on the
cover are engaged with the grooves on the machine, and 2) the catches on the cover are
engaged with the shoulder screws.