Ricoh D131 - Functions Available on the Initial Fax Screen of a Connected Machine; Sending with Fax Connection; Transaction Results for Fax Connected Transmissions

D619 50 SM
 The settings for fax send transactions are limited on the Slave machine to the following
features:
 Memory Sending  Original Set Direction
 One-Touch Speed Dial  Original Side
 Direct Dial Screen  Stamp
 Re-dial Screen  Address Registration
 Original Type  Line Selection
 Resolution  Fax Header Print (TTI)
 Scanning Size  Activity Report
 Mixed Sizes  TX Document Check/Cancel
 Auto Density  Activity Report (TX) Display
 Manual Density  Activity Report (RX) Display
 On a Slave machine, the settings for RX transactions are limited to duplex printing and output
tray selection
 When user authentication is implemented, be sure to implement the same methods for all
connected machines.
Functions Available on the Initial Fax Screen of a Connected Machine
 The only line that can be selected for fax operation on the Master machine is a G3 line.
 The content of a fax header (TTI) print can be selected from only one of two settings.
Sending with Fax Connection
The information for the following functions is registered and stored on the Master machine:
 Address book
 LDAP server
Transaction results for fax connected transmissions
Reports may not print for some types of transactions of machines in a fax connection.