and
Adjustment
3. Upper cover [B] (
x 1)
Rotate the cover down slightly to remove.
4. Web shafts [C] (
x 2)
5. Remove the web cleaning rollers from the shaft driver pins [D].
6. Web bushing [E] (spring x 1)
7. Cleaning roller [F]
Reinstallation
After replacing the web with a new one, you must execute SP1902-001 (Fusing Web Used
Area Display/Setting) to reset the web consumption count to zero. This SP code must be
executed to release SC550.
Be sure to print an SMC report before executing Memory All Clear (SP5801). After executing
SP5801, be sure to re-enter the value recorded for SP1902-001 in the SMC report.
To Next Page
Loading...
