Ricoh D131 - Sp1000 Feed

SP1000 Feed
D131/D132/D133 3-2 SM Appendix
3.2 SP1000 FEED
1001 Leading Edge Registration
Adjusts the printing leading edge registration using the trimming area pattern
(SP2902-003, No.18).
[–9 to +9/0/0.1mm]
Specification: 3±2mm
1002 Side-to-Side Registration
Adjusts printing side-to-side registration for each feed station, using test
pattern (SP2902-003, No.18).
These SP's should be adjusted after replacing the laser synchronization
detector or the laser optical unit.
1 Tray-1
[–9 to +9/0/0.1 mm]
2 Tray-2
3 Tray-3
4 Tray-4 (Japan Only)
5 By-pass Tray
6 LCT
7 Duplex Tray