Ricoh D131 - Punch Unit Type 850 Sc (A812)

Peripheral Specifications
SM Appendix 1-13 D131/D132/D133
Appendix:
Specifications
1.2.5 PUNCH UNIT TYPE 850 SC (A812)
This punch unit is installed in the Finisher SR4080..
Punch Hole Positions
2-hole, 3-hole (NA)
4-hole (EUR/A)
4-hole (North Europe)
Punch Paper Size
2-Hole
A5 to A3 SEF, 11" x 17" to 8.5" x 11" SEF
A5 to A4 LEF, 8.5" x 11" LEF
3-Hole (NA)
A3 SEF, B4 SEF, 11" x 17" SEF
A4 LEF, B5 LEF, 8.5" x 11" LEF
4-Hole (EUR/A)
A3 SEF, 11" x 17" SEF
A4 LEF, 11" x 17" LEF
4-Hole (North Europe)
B5 to A3 SEF, 8.5" x 11" to 11" x 17" SEF
A5 to A4 LEF, 8.5" x 11" LEF, 5.5" x 8.5" LEF
Paper Weight
2-Hole, 3-Hole (NA) 52 g/m
2
to 163 g/m
2
(14 to 43 lb)
4-Hole (Europe/North Europe) 52 g/m
2
to 128 g/m
2
(14 to 34 lb)
Punch Waste Hopper Capacity
2-Hole 40K
3-Hole (NA) 15K
4-Hole (EUR/A) 15K
4-Hole (North Europe) 15K
Power Supply DC 24 V (From Finisher)
Power Consumption 60 W
Weight Less than 2.4 K (5.3 lb.)
Operation Modes All (Shift, Proof, Staple)