Ricoh D131 - Attaching the Interposer Tray (D610;D611;D612)

Cover Interposer Tray CI4000 (D614)
SM 2-79 D131/D132/D133
Installation
Attaching the Interposer Tray (D610/D611/D612)
1. Pick up the cover interposer tray, align the keyholes [A] with the shoulder screws [B], then
slide the cover interposer down onto the screws.
2. Secure the cover interposer with the screw [C] (
x 1, M3 x 6).
3. Either:
 If you are installing the cover interposer tray on the D611/D612, skip the next section and
go directly to “Docking the Finisher and Interposer to the Machine”.
 If you are installing the cover interposer tray on the D610, go to the next section, install
the corner plates on the D610, then go to “Docking the Finisher and Interposer to the
Machine”.