Paper Feed
D131/D132/D133 4-102 SM
4.11.5 BOTTOM PLATE LIFT WIRE REPLACEMENT
Before replacing the rear bottom plate lift wire, remove the front bottom plate lift wire. The shaft
must be removed to replace the lift wire of the bottom plate.
Remove:
Right tandem tray
p.4-97
1. Remove the inner cover [A] (
x 2)
2. Remove the left stay [B].
3. Wire stoppers [C]
Slightly lift the front bottom plate and unhook.
4. Wire covers [D] (
x 1 each)
5. Bracket [E] (
x 1, x 1, bushing x 1)
6. Gear [F]
7. Bottom plate lift wire [G]
To Next Page
Loading...
