Ricoh D131 - Pressure Roller Cleaning Unit; Reinstallation

Fusing Unit
D131/D132/D133 4-76 SM
Reinstallation
 Make sure that the harness of the web driver motor is not pinched by the fusing inner cover
4.9.5 PRESSURE ROLLER CLEANING UNIT
Remove:
 Fusing unit
p.4-70
1. Cover [A] (
x 1)
2. Cleaning roller [B] (
x 2)
3. Cleaning roller [C] (
x 1)
Reinstallation
 When attaching the lower cover of the pressure roller cleaning roller, make sure that the tab
[D] engages with the groove [E].
 If the bushings are noisy after replacement, lubricate them on both ends and the holes where
the bushings are attached with Barrierta Grease L553R.