Ricoh D131 - Docking the Finisher and Interposer to the Machine (D610;D611;D612)

Cover Interposer Tray CI4000 (D614)
D131/D132/D133 2-82 SM
Docking the Finisher and Interposer to the Machine (D610/D611/D612)
1. Attach the rear bracket [A] (
x 2, M4 x14).
2. Attach the front bracket [B] (
x 2, M4 x14).
3. Attach the gasket seals [C] and [D].
4. Attach the sponge strip [A] that is supplied with the finisher.
5. Attach the guide plate (removed from the finisher) to the cover interposer.
 Attach the front end [B] of the plate (
x 1).
 Attach the rear end of the plate with the anti-static brush [C] (
x 1).