Ricoh D131 - ID Sensor

Drum Unit
SM 4-47 D131/D132/D133
Replacement
and
Adjustment
4.6.12 ID SENSOR
Remove:
 OPC drum
p.4-40
 Pick-off pawls
p.4-46
1. ID sensor [A] (
x 2, x 1)
2. After replacing the sensor, do the following SPs:
 SP2962 (Adjustment of Drum Conditions), only if SP3901 (Auto Process Control) is on.
 SP3001-002 (ID Sensor Initialization Setting).