Ricoh D131 - Sc700: Peripherals

SC700: Peripherals
SM Appendix 2-47 D131/D132/D133
Appendix:
Service Call
Conditions
2.8 SC700: PERIPHERALS
2.8.1 SC700: PERIPHERALS
SC700-01 D
ARDF bottom plate lift motor
 The bottom plate HP sensor does not detect the home position
of the bottom plate after the bottom plate lift motor switches on
and lowers the bottom plate.
 The bottom plate position sensor does not detect the position
of the plate after the lift motor switches on and raises the
bottom plate.
 ARDF feed motor disconnected, defective
 Bottom plate HP sensor disconnected, defective
 ARDF main board defective
SC700-02 D
ADF bottom plate motor error
 Bottom plate position sensor does not detect the plate after
the bottom plate lift motor switches on to lift the plate.
 Bottom plate HP sensor does not detect the plate after the
bottom plate motor reverses to lower the plate.
 Bottom plate position sensor defective
 Bottom plate HP sensor defective
 Bottom plate motor defective
 ADF main board defective
SC720-01 D
Downstream finisher communication error
No response signal was received from the downstream finisher
(D611/D612) after 3 attempts
 Finisher I/F cable loose, broken defective
 Finisher control board defective