Ricoh D131 - Page 515

SC700: Peripherals
D131/D132/D133 2-48 SM Appendix
SC720-24 B
Exit guide motor (D611/D612)
The status of the exit guide sensor did not change at the
prescribed time during operation of the exit guide.
 Exit guide open sensor loose, broken, defective.
 Exit guide motor defective
 Finisher main board defective
SC720-25
Punch motor error (D611/D612)
After the punch operation, the punch HP sensor did not detect the
punch unit at the home position.
 Punch motor connection loose, broken, defective.
 Punch overload (blocked by obstruction)
 Home position sensor connection loose, broken, defective
 HP sensor defective
SC720-30 B
Finisher jogger motor error (D611/D612)
 The finisher jogger HP sensor remains de-activated for more
1,000 pulses when returning to home position.
 The finisher jogger HP sensor remains activated for more than
1,000 pulses when moving away from home position.
 Jogger HP sensor defective
 Jogger mechanism overload
 Jogger motor defective (not rotating)
 Finisher main board defective
 Harness disconnected or defective