Ricoh D131 - Install the Key Card Bracket and Assembled Key Counter

Card Reader Bracket (B498), Key Counter Bracket (B452)
SM 2-93 D131/D132/D133
Installation
Install the Key Card Bracket and Assembled Key Counter
 Make sure that the machine is turned off and unplugged from its power source before you
do this procedure.
1. Use a pair of nippers to remove the screw hole cover [A].
2. Use the tip of a small screwdriver to remove plate [B].
3. Attach the assembled key counter to the side of the machine at [A] (
x1 Stepped) and [B]
(
x1, x1)