Peripheral Specifications
D131/D132/D133 1-12 SM Appendix
DIP SW Settings
The correct DIP SW settings of the Punch Unit 531 are provided in the table below for your
reference only. The DIP switches of these punch units do not need to be changed at installation,
or adjusted for operation.
Punch Unit Unit No.
DIP SW Settings
1 2 3 4
2/3-Hole (NA) B531-17 1 0 1 0
2/4-Hole (EUR/A) B531-27 1 0 0 1
0: OFF, 1: ON
To Next Page
Loading...
