Ricoh D131 - Page 405

Program Download
SM 6-17 D131/D132/D133
Trouble-
shooting
Display Details Recovery
06
Download Error
E06
Power off/on
Controller ROM update error 6  Turn the machine
power off/on.
 Set controller
DIPSW-1 to ON to
force the machine
to write to ROM.
 If you cannot force
the machine to
write, replace the
controller board.
CPU clock error.
19
Download Error
E19 Power off/on
Controller ROM update error 7
 Software defective
Schedule data is unclear.
20
Down Error E20
Power Off/On
System error 1 (+SC991)
 Turn the machine
off/on and re-try
 Replace controller
board
The physical address cannot be
mapped. Software/hardware is
defective
21
Download Error
E21 Power Off/On
System error 2 (+SC991)  Turn the machine
off/on and re-try.
 Replace RAM
 Replace the
controller board
There is not sufficient memory to
download.
22
Download Error
E22 Module ID
Card No xx/xx
System error 3 (+SC991)  Turn the machine
off/on and re-try.
 Replace card
 Replace controller
board
Data fails to decompress. Card
defective.
SC991
System error 4  Turn the machine
off/on and re-try
 Set DIP SW 1 to
ON and re-try
 Replace the
controller board
“Selfupdate” does not execute.
Software defective.