D619 34 SM
Master Machine Procedure 1
1. Turn the machine off and disconnect it from its power source.
2. Remove the SD card slot cover (
x1).
3. Confirm that the Printer/Scanner SD card is in Slot 1.
4. With its label turned away toward the front of the machine, insert Remote Fax Card Type 32
into SD card slot 2 (lower slot). Push it in until you hear it lock in place.
5. Connect the machine power cord to its power source, and then turn the machine on.
6. Enter the SP mode.
7. Do SP5-873-1 to move the fax connection application from the SD card in Slot 2 (lower slot)
to the Printer/Scanner SD card in Slot 1 (upper slot).
8. Switch the machine off.
9. Remove the remote fax SD card from Slot 2, and then store it in a safe place.
10. Re-attach the SD card slot cover, and then switch the machine on.
11. At the Ready screen, press [User Tools/Counter]
on the operation panel.
12. Touch the Administrator Tools tab.
To Next Page
Loading...
