Output Jogger Unit Type 9002B (B513)
D131/D132/D133 2-54 SM
3. Remove the cover plate [A] from the jogger unit (
x 2). Keep the screws.
4. With the jogger unit connector on the left side, hook the frame of the jogger unit [A] into the
holes on the left and right side of the finisher frame.
5. On the left side, fasten the connector [B] to the socket (
x 1).
6. On the left and right side, attach the jogger unit frame to the side of the finisher with the
screws [C] provided (
x 2).
7. Re-attach the jogger unit cover to its frame with the screws removed in step 2 (
x 2).
To Next Page
Loading...
