Ricoh D131 - Page 1037

SM 145 D619
5
PSTN dial-in routing setting
0: OFF
1: ON
1: The machine sets multiple PSTN dial-in
numbers in the PSTN dial-in line and transfers
received data from each PSTN dial-in number to
each address.
6 Not used Do not change the settings.
7
Action when there is no box
with an F-code that matches
the received SUB code
0: Disconnect the line
1: Receive the message
(using normal reception mode)
Change this setting when the customer requires.
Communication Switch 18 (SP No. 1-104-025)
No Function Comments
0-4 Not used Do not change the settings.
5
IP-Fax dial-in routing selection
0: Off
1: On
1: Transfers received data to each IP-Fax dial-in
number.
IP-Fax dial-in number is a 4-digit number.
6
PSTN 2 dial-in routing
0: Off
1: On
Enables or disables dial-in routing for the PSTN 2
connection.
7
PSTN 3 dial-in routing
0: Off
1: On
Enables or disables dial-in routing for the PSTN 3
connection.
Communication Switch 19 - Not used (do not change the settings)
Communication Switch 1A - Not used (do not change the settings)