Mailbox CS4000 (D616)
D131/D132/D133 2-86 SM
2. If the Cover Interposer Tray (D614) is installed on the finisher, remove it.
The cover interposer tray and mailbox cannot be installed on the finisher at the same
time.
3. Remove the top cover [A] of the finisher (
x 1).
4. Remove the bracket [B] (
x 1).
5. Attach the guide plate [A] to the top of the finisher (
x 2, M3x8).
6. Attach the mailbox [B] to the top of the finisher (
x 4, M3x8).
7. Attach the 9 trays [C] to the mailbox.
8. Give the decals [D] to the customer for notation and attaching at the correct location.
To Next Page
Loading...
