Ricoh D131 - Page 1303

SM i B804/B805/D373/D374/D612
BOOKLET FINISHER & FINISHER
B804/B805/D373/D374/D611
TABLE OF CONTENTS
1. REPLACEMENT AND ADJUSTMENT ............................................ 1
1.1 COVERS ....................................................................................................... 1
1.1.1 EXTERIOR COVERS .......................................................................... 1
1.1.2 UPPER TRAY, END FENCE ............................................................... 2
1.2 MAIN UNIT .................................................................................................... 3
1.2.1 UPPER TRAY LIMIT SENSOR, LIMIT SWITCH .................................. 3
1.2.2 POSITIONING ROLLER ...................................................................... 4
1.2.3 PROOF TRAY EXIT SENSOR ............................................................. 4
1.2.4 UPPER TRAY HEIGHT SENSORS 1, 2 .............................................. 5
1.2.5 EXIT GUIDE PLATE, UPPER TRAY EXIT SENSOR .......................... 5
1.2.6 PROOF TRAY FULL SENSOR ............................................................ 6
1.2.7 FINISHER ENTRANCE SENSOR ....................................................... 7
1.2.8 PRE-STACK TRAY EXIT SENSOR ..................................................... 7
1.3 STAPLER UNIT ............................................................................................ 8
1.3.1 CORNER STAPLER ............................................................................ 8
1.3.2 POSITIONING ROLLER ...................................................................... 9
1.4 FOLD UNIT ................................................................................................. 10
1.4.1 FOLD UNIT ........................................................................................ 10
1.4.2 FOLD UNIT ENTRANCE SENSOR ................................................... 12
1.4.3 FOLD UNIT EXIT SENSOR ............................................................... 12
1.4.4 STACK PRESENT SENSOR ............................................................. 13
1.4.5 FOLDING HORIZONTAL SKEW ADJUSTMENT (FOR B804 ONLY)
14
1.4.6 FOLD VERTICAL SKEW ADJUSTMENT (FOR B804 ONLY) ........... 17
1.5 BOOKLET STAPLER UNIT ........................................................................ 19
1.5.1 BOOKLET STAPLER ......................................................................... 19
1.5.2 BOOKLET STAPLER MOTOR .......................................................... 19
2. DETAILED SECTION DESCRIPTIONS ......................................... 22
2.1 COMPONENT LAYOUT ............................................................................. 22