Copy Connector Type 3260 (B328)
D131/D132/D133 2-98 SM
2.18.2 PREPARATION
Before you begin the installation procedure:
Measure the distance between the machines to be connected.
Confirm that the printer/scanner option is installed on the machines.
Determine the number of cables and repeater hubs that are necessary based on the distance
measured between the machines.
Distance
Power Repeater Hubs
Required
Interface Cables Required
Up to 4.5 m (14.8 ft.) None 1
4.5 to 9.0 m (14.8 to 29.5 ft) 1 2
9.0 to 13.5 m (29.5 to 112.5 ft.) 2 3
Install the key labeled “Printer/Other Function + Scanner” (or its equivalent symbol key-top for
EU) on a machine with the printer/scanner option installed.
Install the key labeled “Other Function” (or its equivalent symbol key-top for EU) on a machine
without the printer/scanner option.
To Next Page
Loading...
