Replacement and Adjustment
D454/D615 72 SM
FM1 Z-Folding
User Tool Adjustment (Operator, Skilled Operator)
The following standard adjustment of "S" can be done by the operator or skilled operator in
the User Tools mode. Only "S" can be adjusted by the operator, as shown in the table below.
Size Setting Default Range
A3 SEF S 2 mm 2 to 25 mm
B4 SEF S 2 mm 2 to 17 mm
A4 SEF S 2 mm 2 to 17 mm
DLT S 2 mm 2 to 20 mm
LG S 2 mm 2 to 17 mm
LT SEF S 2 mm 2 to 17 mm
Other S 2 mm 2 to 17 mm
Pitch Adj. 1 mm
Engine SP Adjustment
The following fine adjustment of "S" and "L" can be done by the customer engineer in the SP
mode. "L" can be adjusted only for the paper sizes listed in the table below.
To Next Page
Loading...
