Replacement and Adjustment
D454/D615 74 SM
FM2 Half Fold
User Tool Adjustment (Operator, Skilled Operator)
The following standard adjustment of "S" can be done by the operator or skilled operator in
the User Tools mode. Only "S" can be adjusted by the operator, as shown in the table below.
Size Setting Default Range
A3 SEF S 0 mm ±10 mm
B4 SEF S 0 mm ±10 mm
A4 SEF S 0 mm ±10 mm
DLT S 0 mm ±10 mm
LG S 0 mm ±10 mm
LT SEF S 0 mm ±10 mm
Other S 0 mm ±10 mm
Pitch Adj. ±1 mm
Notes
No folding adjustment can be done for 13"x19.2", 13"x19", 12.6"x19.2"
Engine SP Adjustment
The following fine adjustment of "S" can be done by the customer engineer in the SP mode.
To Next Page
Loading...
