Paper Feed
D131/D132/D133 4-106 SM
11. Remove the rear bottom plate [K] (
x 1).
12. Re-position the return position sensor bracket [L] (
x 1).
To use the paper tray for A4 size, set the screw in the left hole as shown. (For LT size, the
screw should be placed on the right.)
13. Reinstall the rear bottom plate.
14. Input the new paper size into SP5959-001 (Paper Size – Tray 1).
15. Do the printer adjustments. See "Print Image Adjustment" at the end of this section.
To Next Page
Loading...
